User's Manual
3.
Configure an SRV rule according to the parameters described in the table below.
4.
Click Add, and then save ("burn") your settings to flash memory.
Table 12-17: Internal SRV Table Parameter Descriptions
Parameter
Domain Name
domain-name
[Srv2Ip_InternalDomain]
Transport Type
transport-type
[Srv2Ip_TransportType]
DNS Name (1-3)
dns-name-1|2|3
[Srv2Ip_Dns1/2/3]
Priority (1-3)
priority-1|2|3
[Srv2Ip_Priority1/2/3]
Weight (1-3)
weight-1|2|3
[Srv2Ip_Weight1/2/3]
Version 7.0
Figure 12-8: Internal SRV Table - Add Row Dialog Box
Defines the host name to be translated.
The valid value is a string of up to 31 characters. By default, no
value is defined.
Defines the transport type.
[0] UDP (default)
[1] TCP
[2] TLS
Defines the first, second or third DNS A-Record to which the host
name is translated.
By default, no value is defined.
Defines the priority of the target host. A lower value means that it is
more preferred.
By default, no value is defined.
Defines a relative weight for records with the same priority.
By default, no value is defined.
Description
151
Mediant 800B Gateway and E- SBC
12. Network