User's Manual
(TranscodingMode) parameter must be set to Force. The parameter can either be the
global parameter or per IP Profile.
4.
Click Submit.
14.7
Configuring Various Codec Attributes
The following codec attribute settings can be configured in the General Media Settings
page:
AMR coder:
•
'Payload Format': Defines the AMR payload format type.
SILK coder (Skype's default audio codec):
•
'Silk Tx Inband FEC': Enables forward error correction (FEC) for the SILK coder.
•
'Silk Max Average Bit Rate': Defines the maximum average bit rate for the SILK
coder.
For a detailed description of these parameters and for additional codec parameters, see
''Coder Parameters'' on page 1005.
To configure codec attributes:
1.
Open the General Media Settings page (Configuration tab > VoIP menu > Media >
General Media Settings).
Figure 14-10: Codec Settings in General Media Settings Page
2.
Configure the parameters as required, and then click click Submit.
3.
To save the changes to flash memory, see ''Saving Configuration'' on page 732.
14.8
Configuring Analog Settings
The Analog Settings page allows you to configure various analog parameters. For a
detailed description of the parameters appearing on this page, see ''Configuration
Parameters Reference'' on page 909.
This page also selects the type (USA or Europe) of FXS and/or FXO coefficient
information. The FXS coefficient contains the analog telephony interface characteristics
such as DC and AC impedance, feeding current, and ringing voltage.
Version 7.0
209
Mediant 800B Gateway and E- SBC
14. Media