AudioCodes Mediant 800B User Manual page 474

Parameter
suffix-to-add
[Suffix2Add]
TON
ton
[NumberType]
NPI
npi
[NumberPlan]
Presentation
is-presentation-
restricted
[IsPresentationRestricted]
User's Manual
telephone number. For example, if you enter 00 and the phone number
is 1234, the new number is 123400.
Defines the Type of Number (TON).

If you selected 'Unknown' for the NPI, you can select Unknown [0].

If you selected 'Private' for the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or Level
0 Regional (Local) [4].

If you selected 'E.164 Public' for the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber [4]
or Abbreviated [6].
The default is 'Unknown'.
Notes:

The parameter is applicable only to number manipulation tables for
IP-to-Tel calls.

TON can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.

For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 494.
Defines the Numbering Plan Indicator (NPI).

[0] Unknown (default)

[9] Private

[1] E.164 Public

[-1] Not Configured = value received from PSTN/IP is used
Notes:

The parameter is applicable only to number manipulation tables for
IP-to-Tel calls.

NPI can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.

For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 494.
Enables caller ID.

Not Configured = Privacy is determined according to the Caller ID
table (see Configuring Caller Display Information on page 577).

[0] Allowed = Sends Caller ID information when a call is made using
these destination/source prefixes.

[1] Restricted = Restricts Caller ID information for these prefixes.
Notes:

This field is applicable only to number manipulation tables for source
phone number manipulation.

If this field is set to Restricted and the 'Asserted Identity Mode'
(AssertedIdMode) parameter is set to Add P-Asserted-Identity, the
From header in the INVITE message includes the following: From:
'anonymous' <sip: anonymous@anonymous.invalid> and 'privacy:
id' header.
474
Mediant 800B Gateway and E- SBC
Description
Document #: LTRT-10296