AudioCodes Mediant 800B User Manual page 376

Note: To view the registration status of endpoints with a SIP Registrar/Proxy server,
see ''Viewing Registration Status'' on page 823.

To configure the Proxy and registration parameters:
1. Open the Proxy & Registration page (Configuration tab > VoIP menu > SIP
Definitions > Proxy & Registration).
2. Configure the parameters as required.
3. Click Submit.

To register or un-register the device to a Proxy/Registrar:

Click the Register button to register.

Click Un-Register button to un-register.
Instead of registering the entire device, you can register specific entities as listed below by
using the Register button located on the page in which these entities are configured:
User's Manual
Mediant 800B Gateway and E- SBC
376 Document #: LTRT-10296