User's Manual
2.
Click Add; the following dialog box appears:
3.
Configure a Proxy Set according to the parameters described in the table below.
4.
Click Add.
5.
Select the index row of the Proxy Set that you added, and then click the Proxy
Address Table link located below the table; the Proxy Address table opens.
6.
Click Add; the following dialog box appears:
Figure 17-12: Proxy Address Table - Add Row Dialog Box
7.
Configure the address of the Proxy Set according to the parameters described in the
table below.
8.
Click Add.
Version 7.0
Figure 17-11: Proxy Sets Table - Add Row Dialog Box
363
Mediant 800B Gateway and E- SBC
17. Control Network