AudioCodes Mediant 800B User Manual page 247

User's Manual
Table 15-9: LDAP Configuration Table Parameter Descriptions
Parameter
Index
[LdapConfiguration_Index]
LDAP Servers Group
server-group
[LdapConfiguration_Group]
LDAP Server IP
server-ip
[LdapConfiguration_LdapConfSer
verIp]
LDAP Server Port
server-port
[LdapConfiguration_LdapConfSer
verPort]
LDAP Server Max Respond Time
max-respond-time
[LdapConfiguration_LdapConfSer
verMaxRespondTime]
LDAP Server Domain Name
domain-name
[LdapConfiguration_LdapConfSer
verDomainName]
LDAP Password
password
[LdapConfiguration_LdapConfPa
ssword]
Version 7.0
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Assigns the LDAP server to an LDAP Server Group, configured in
the LDAP Server Groups table (see ''Configuring LDAP Server
Groups'' on page 243).
Notes:

The parameter is mandatory and must be set before
configuring the other parameters in the table.

Up to two LDAP servers can be assigned to the same LDAP
Server Group.
Defines the IP address of the LDAP server (in dotted-decimal
notation, e.g., 192.10.1.255).
By default, no IP address is defined.
Notes:

The parameter is mandatory.

If you want to use an FQDN for the LDAP server, leave the
parameter undefined and configure the FQDN in the 'LDAP
Server Domain Name' parameter (see below).
Defines the port number of the LDAP server.
The valid value range is 0 to 65535. The default port number is
389.
Defines the duration (in msec) that the device waits for LDAP
server responses.
The valid value range is 0 to 86400. The default is 3000.
Note: If the response time expires, you can configure the device
to use its local database (Web Users table) for authenticating the
user. For more information, see ''Configuring Local Database for
Management User Authentication'' on page 256.
Defines the domain name (FQDN) of the LDAP server. The
device tries to connect to the LDAP server according to the IP
address listed in the received DNS query. If there is no
connection to the LDAP server or the connection to the LDAP
server fails, the device tries to connect to the LDAP server with
the next IP address in the DNS query list.
Note: If the 'LDAP Server IP' parameter is configured, the 'LDAP
Server Domain Name' parameter is ignored. Thus, if you want to
use an FQDN, leave the 'LDAP Server IP' parameter undefined.
Defines the user password for accessing the LDAP server during
connection and binding operations.

LDAP-based SIP queries: The parameter is the password
used by the device to authenticate itself, as a client, to obtain
LDAP service from the LDAP server.

LDAP-based user login authentication: The parameter
represents the login password entered by the user during a
login attempt. You can use the $ (dollar) sign in this value to
enable the device to automatically replace the $ sign with the
247
Description
Mediant 800B Gateway and E- SBC
15. Services