AudioCodes Mediant 800B User Manual page 661

User's Manual
Parameter
Version 7.0
694.

[5] Dial Plan = The IP destination is determined by a Dial Plan
index of the loaded Dial Plan file. The syntax of the Dial Plan
index in the Dial Plan file is as follows: <destination / called
prefix number>,0,<IP destination>
Note that the second parameter "0" is ignored. An example of
a configured Dial Plan (# 6) in the Dial Plan file is shown
below:
[ PLAN6 ]
200,0,10.33.8.52
routed to destination 10.33.8.52
201,0,10.33.8.52
300,0,itsp.com
routed to destination itsp.com
Once the Dial Plan is defined, you need to assign it (0 to 7) to
the routing rule as the destination in the 'Destination Address'
parameter, where "0" denotes [PLAN1], "1" denotes [PLAN2],
and so on.

[7] LDAP = LDAP-based routing. Make sure that the Routing
Policy assigned to the routing rule is configured with the LDAP
Server Group for defining the LDAP server(s) to query.

[8] Gateway = The device routes the SBC call to the Tel side
(Gateway call) using an IP-to-Tel routing rule in the Inbound IP
Routing table (see Configuring IP to Trunk Group Routing
Rules on page 506). The IP-to-Tel routing rule must be
configured with the same call matching characteristics as this
SBC IP-to-IP routing rule. This option is also used for
alternative routing of an IP-to-IP route to the PSTN. In such a
case, the IP-to-Tel routing rule must also be configured with
the same call matching characteristics as this SBC IP-to-IP
routing rule.

[9] Routing Server = Device sends a request to a third-party
routing server for an appropriate destination (next hop) for the
matching call.

[10] All Users = Device checks whether the Request-URI (i.e.,
destination user) in the incoming INVITE is registered in its'
users' database, and if yes, it sends the INVITE to the address
of the corresponding contact specified in the database. If the
Request-URI is not registered, the call is rejected.
661
Description
; called prefix 200 is
; called prefix 300 is
Mediant 800B Gateway and E- SBC
33. Routing SBC