Backing Up And Loading Configuration File - AudioCodes Mediant 800B User Manual

User's Manual
44.5

Backing Up and Loading Configuration File

You can save a copy/backup of the device's current configuration settings as an ini file to a
folder on your computer, using the Configuration File page. The saved file includes only
parameters that were modified and parameters with other than default values. The
Configuration File page also allows you to load an ini file to the device. If the device has
"lost" its configuration, you can restore the device's configuration by loading the previously
saved ini file or by simply loading a newly created ini file.
You can also save the current configuration to a remote server or USB and update
configuration from an external USB hard drive connected to the device's USB port. For
more information, see USB Storage Capabilities on page 799.
# copy cli-script to <URL of TFTP/HTTP/HTTPS server or USB>
For example:

Remote server:
# copy cli-script to tftp://192.168.0.3/config-device1.txt

USB:
# copy cli-script to usb://config-device1.txt
Note:
included in the ini file are reset to default settings.

To save or load an ini file:
1. Open the Configuration File page by doing one of the following:
•
From the Navigation tree, click the Maintenance tab, click the Software Update
menu, and then click Configuration File.
•
On the toolbar, click Device Actions, and then from the drop-down menu,
choose Load Configuration File or Save Configuration File.
2. To save the ini file to a folder on your computer:
Version 7.0
When loading an ini file using the Configuration File page, parameters not
Figure 44-11: Configuration File Page
775 Mediant 800B Gateway and E- SBC
44. Software Upgrade