AudioCodes Mediant 800B User Manual page 968

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

Parameter
[TCPKeepAliveTime]
[TCPKeepAliveInterval]
[TCPKeepAliveRetry]
NAT Translation Table
NAT Translation Table
configure voip >
voip-network
NATTranslation
[NATTranslation]
Media Realm Table
Media Realm Table
configure voip >
voip-network realm
[CpMediaRealm]
User's Manual
SIPInterface_MaxNumOfRegUsers,
SIPInterface_EnableUnAuthenticatedRegistrations,
SIPInterface_UsedByRoutingServer;
[ \SIPInterface ]
For a detailed description of the table, see ''Configuring SIP Interfaces''
on page 342.
Defines the interval (in sec) between the last data packet sent and the
first keep-alive probe to send.
The valid value is 10 to 65,000. The default is 60.
Notes:
Simple ACKs such as keepalives are not considered data packets.
TCP keepalive is enabled per SIP Interface in the SIP Interface table.
Defines the interval (in sec) between consecutive keep-alive probes,
regardless of what the connection has exchanged in the meantime.
The valid value is 10 to 65,000. The default is 10.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interface
table.
Defines the number of unacknowledged keep-alive probes to send
before considering the connection down.
The valid value is 1 to 100. The default is 5.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interface
table.
Defines NAT rules for translating source IP addresses per VoIP interface
(SIP control and RTP media traffic) into NAT IP addresses.
The format of the ini file table parameter is as follows:
[ NATTranslation ]
FORMAT NATTranslation_Index =
NATTranslation_SrcIPInterfaceName,
NATTranslation_TargetIPAddress, NATTranslation_SourceStartPort,
NATTranslation_SourceEndPort, NATTranslation_TargetStartPort,
NATTranslation_TargetEndPort;
[ \NATTranslation ]
For a detailed description of the table, see ''Configuring NAT Translation
per IP Interface'' on page 154.
Defines Media Realms.
The format of the ini file table parameter is as follows:
[ CpMediaRealm ]
FORMAT CpMediaRealm_Index = CpMediaRealm_MediaRealmName,
CpMediaRealm_IPv4IF, CpMediaRealm_IPv6IF,
CpMediaRealm_PortRangeStart, CpMediaRealm_MediaSessionLeg,
CpMediaRealm_PortRangeEnd, CpMediaRealm_IsDefault,
CpMediaRealm_QoeProfile, CpMediaRealm_BWProfile;
[ \CpMediaRealm ]
For a detailed description of the table, see ''Configuring Media Realms''
on page 323.
968
Mediant 800B Gateway and E- SBC
Description
Document #: LTRT-10296

Advertisement

Table of Contents
loading

Table of Contents