AudioCodes Mediant 800B User Manual page 767

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
Loading a File with a Single Software License Key:
a.
b.
c.
Loading a File with Multiple Software License Keys:
a.
b.
If the Software License Key is valid, it is burned to the device's flash memory and
displayed in the 'Current Key' field.
4.
Verify that the Software License Key was successfully installed, by doing one of the
following:
In the Software Upgrade Key Status page, check that the listed features and
capabilities activated by the installed Software License Key match those that
were ordered.
Access the Syslog server and ensure that the following message appears in the
Syslog server:
"S/N___ Key Was Updated. The Board Needs to be Reloaded with ini file\n"
5.
Reset the device; the new capabilities and resources enabled by the Software License
Key are active.
Note:
unsuccessfully loaded (i.e., the "SN_" line is blank), do the following preliminary
troubleshooting procedures:
1.
Open the Software License Key file and check that the "S/N" line appears. If it
does not appear, contact AudioCodes.
2.
Verify that you have loaded the correct file. Open the file and ensure that the first
line displays "[LicenseKeys]".
3.
Verify that the content of the file has not been altered.
44.2.2.2 Installing Software License Key through CLI
To install the Software License Key through CLI, use the following commands:
To install the Software License Key:
(config-system)# feature-key <"string enclosed in double
quotation marks">
To view the Software License Key:
show system feature-key
Version 7.0
Open the Software License Key file using a text-based program such as
Notepad.
Copy-and-paste the string from the file to the 'Add a Software Upgrade Key'
field.
Click the Add Key button.
In the 'Load Upgrade Key file ...' field, click the Browse button and navigate
to the folder in which the Software License Key file is located on your
computer.
Click Load File; the new key is installed on the device.
If the Syslog server indicates that the Software License Key was
767
Mediant 800B Gateway and E- SBC
44. Software Upgrade

Advertisement

Table of Contents
loading

Table of Contents