Configuring Date And Time Manually - AudioCodes Mediant 800B User Manual

User's Manual
11.2

Configuring Date and Time Manually

You can manually configure the date and time of the device instead of using an NTP server
(as described in ''Configuring Automatic Date and Time using SNTP'' on page 119).

To manually configure the device's date and time, using the Web interface:
1. Open the Time and Date page (Configuration tab > System menu > Time And
Date), and then scroll down to the 'Local Time' group:
Figure 11-3: Manually Configured Date and Time on Time and Date Page
2. In the 'Local Time' fields, enter the current date and time of the geographical location
in which the device is installed:
•
Date:
♦
♦
♦
•
Time:
♦
♦
♦
3. Click Submit; the date and time is displayed in the 'UTC Time' read-only field.
Notes:
•
If the device is configured to obtain the date and time from an SNTP server, the
fields on this page are read-only, displaying the date and time received from the
NTP server.
•
After performing a hardware reset, the date and time are returned to default values
and thus, you should subsequently update the date and time.
Version 7.0
'Year' in yyyy format (e.g., "2015")
'Month' in mm format (e.g., "3" for March)
'Day' in dd format (e.g., "27")
'Hour' in 24-hour format (e.g., "4" for 4 am)
'Minutes' in mm format (e.g., "57")
'Seconds' in ss format (e.g., "45")
121 Mediant 800B Gateway and E- SBC
11. Date and Time