AudioCodes Mediant 800B User Manual page 141

Media gateway & enterprise session border controller (e-sbc)

Hide thumbs Also See for Mediant 800B:

Table of Contents

User's Manual

12.4.3.3 VoIP Interfaces for Combined Application Types

This example describes the configuration of multiple interfaces for the following

applications:

One interface for the OAMP application.

Interfaces for Call Control and Media applications, where two of them are IPv4

interfaces and one is an IPv6 interface.

Interface table:

Table 12-9: Example of VoIP Interfaces of Combined Application Types in Interface Table

Static Route table: A routing rule is required to allow remote management from a

host in 176.85.49.0/24:

The NTP application is configured (through the ini file) to serve as OAMP applications:

EnableNTPasOAM = 1

DiffServ table:

Layer-2 QoS values are assigned:

Layer-3 QoS values are assigned:

200.200.85.14

200.200.86.14

2000::1:200:200:86:1

Table 12-10: Example of Static Route Table

For packets sent with DiffServ value of 46, set VLAN priority to 6

For packets sent with DiffServ value of 40, set VLAN priority to 6

For packets sent with DiffServ value of 26, set VLAN priority to 4

For packets sent with DiffServ value of 10, set VLAN priority to 2

For Media Service class, the default DiffServ value is set to 46

For Control Service class, the default DiffServ value is set to 40

For Gold Service class, the default DiffServ value is set to 26

For Bronze Service class, the default DiffServ value is set to 10

Prefix Length

Mediant 800B Gateway and E- SBC

V6CntrlMedia

192.168.0.10