User's Manual
Parameter
GW Group Status
GW Group Registered IP
Address
GW Group Registered Status
Version 7.0
same server (IP Group), but different port.
[0] Disable = (Default) The port configured for the associated
Proxy Set is used as the destination port.
[1] Enable = The port indicated in the Request-URI of the
incoming message is used as the destination port.
(Read-only field) Displays the IP address of the IP Group entity
(gateway) if registered with the device; otherwise, the field is blank.
Note: The field is applicable only to Gateway-type IP Groups (i.e.,
the 'Type' parameter is configured to Gateway).
(Read-only field) Displays whether the IP Group entity (gateway) is
registered with the device ("Registered" or "Not Registered").
Note: The field is applicable only to Gateway-type IP Groups (i.e.,
the 'Type' parameter is configured to Gateway).
361
17. Control Network
Description
Mediant 800B Gateway and E- SBC