AudioCodes Mediant 800B User Manual page 350


To configure an IP Group:
1. Open the IP Group table (Configuration tab > VoIP menu > VoIP Network > IP
Group Table).
2. Click Add; the following dialog box appears:
3. Configure an IP Group according to to the parameters described in the table below.
4. Click Add.
Parameter
Common Parameters
Index
[IPGroup_Index]
SRD
srd-name
[IPGroup_SRDName]
Name
name
[IPGroup_Name]
User's Manual
Figure 17-10: IP Group Table - Add Row Dialog Box
Table 17-6: IP Group Table Parameter Descriptions
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Assigns an SRD to the IP Group.
If only one SRD is configured in the SRD table, the SRD is assigned
by default. If multiple SRDs are configured in the SRD table, no
value is assigned by default.
For configuring SRDs, see Configuring SRDs on page 331.
Notes:

The parameter is mandatory.

For the parameter to take effect, a device reset is required.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique name.
Mediant 800B Gateway and E- SBC
Description
350 Document #: LTRT-10296