Configuring Trunk Group Settings Table - AudioCodes Mediant 800B User Manual

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
Parameter
Trunk Group ID
trunk-group-id
[TrunkGroup_TrunkGroupNum]
Tel Profile Name
tel-profile-id
[TrunkGroup_ProfileName]
22.2

Configuring Trunk Group Settings Table

The Trunk Group Settings table lets you configure various settings per Trunk Group, which
are configured in the Trunk Group table. The main configuration includes the following:
Channel select method, which defines how the device allocates IP-to-Tel calls to the
channels of a Trunk Group.
Registration method for registering Trunk Groups to remote IP servers (Serving IP
Group).
The Trunk Group Settings table also provides an Action drop-down button with commands
that let you perform various actions per configured Trunk Group:
Lock / Unlock: Locks (blocks) a Trunk Group in order to take its member trunks out-
of-service. For more information, see 'Locking and Unlocking Trunk Groups' on page
736.
Register / Un-Register: Initiates a registration request for the Trunk Group with a
Serving IP Group. For more information, see the description of the 'Registration Mode'
parameter of the Trunk Group Settings table in this section.
The following procedure describes how to configure settings for Trunk Groups through the
Web interface. You can also configure it through ini file (TrunkGroupSettings) or CLI
(configure voip/gw hunt-or-trunk-group trunk-group-setting).
To configure Trunk Group settings:
1.
Open the Trunk Group Settings table (Configuration tab > VoIP menu > Gateway >
Trunk Group > Trunk Group Settings).
2.
Click Add; the following dialog box appears:
Version 7.0
Defines the Trunk Group ID for the specified channels. The same
Trunk Group ID can be assigned to more than one group of
channels. If an IP-to-Tel call is assigned to a Trunk Group, the IP
call is routed to the channel(s) pertaining to that Trunk Group ID.
The valid value can be 0 to 119.
Assigns a Tel Profile to the Trunk Group.
For configuring Tel Profiles, see ''Configuring Tel Profiles'' on
page 392.
461
Description
Mediant 800B Gateway and E- SBC
22. Trunk Groups

Advertisement

Table of Contents
loading

Table of Contents