AudioCodes Mediant 800B User Manual page 561

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
Parameter
Local Phone Number
local-phone-number
[ISDNSuppServ_LocalPhoneNumber]
Module
module
[ISDNSuppServ_Module]
Port
port
[ISDNSuppServ_Port]
User ID
user-id
[ISDNSuppServ_UserId]
User Password
user-password
[ISDNSuppServ_UserPassword]
Caller ID Name
caller-id-number
[ISDNSuppServ_CallerID]
Presentation
presentation-restricted
[ISDNSuppServ_IsPresentationRestricted]
Caller ID Enabled
caller-id-enable
[ISDNSuppServ_IsCallerIDEnabled]
Version 7.0
26. Configuring Supplementary Services
IP-to-Tel routing
Mapping between local and global (E.164) numbers
between Tel and IP sides respectively
Defines a local telephone extension number for the
endpoint (e.g., the PBX extension number). The local
number is used for the following functionalities:
Validation of source (calling) number for Tel-to-IP
calls
Mapping between local and global (E.164) numbers
between Tel and IP sides respectively
Defines the device's module number to which the
endpoint is connected.
Defines the port number on the module to which the
endpoint is connected.
Defines the User ID for registering the endpoint to a
third-party softswitch for authentication and/or billing.
Defines the user password for registering the endpoint to
a third-party softswitch for authentication and/or billing.
Note: For security, the password is displayed as an
asterisk (*).
Defines the caller ID name of the endpoint (sent to the IP
side).
The valid value is a string of up to 18 characters.
Determines whether the endpoint sends its Caller ID
information to the IP when a call is made.
[0] Allowed = The device sends the string defined in
the 'Caller ID' field when this endpoint makes a Tel-to-
IP call.
[1] Restricted = The string defined in the 'Caller ID'
field is not sent.
Enables the receipt of Caller ID.
[0] Disabled = The device does not send Caller ID
information to the endpoint.
[1] Enabled = The device sends Caller ID information
to the endpoint.
561
Mediant 800B Gateway and E- SBC
Description

Advertisement

Table of Contents
loading

Table of Contents