AudioCodes Mediant 800B User Manual page 762

3. Configure the SBC User Info table parameters according to the table below.
4. Click Add.
5. To save the changes to flash memory, see ''Saving Configuration'' on page 732.
To register a user, select the user's table entry, and then from the Action button's drop-
down list, choose Register. To un-register a user, select the user, and then from the
Action button's drop-down list, choose Un-Register.
Table 44-3: SBC User Info Table Parameter Descriptions
Parameter
Index
[SBCUserInfoTable_Index]
Local User
[SBCUserInfoTable_LocalUser]
Username
[SBCUserInfoTable_Username]
Password
[SBCUserInfoTable_Password]
IP Group
[SBCUserInfoTable_IPGroupName]
Status
[SBCUserInfoTable_Status]
44.1.7.3.2 Configuring SBC User Info Table through CLI
The SBC User Info table can be configured in the CLI using the following commands:

To add and/or modify a user (example):
# configure voip
(config-voip)# sip-definition proxy-and-registration
(sip-def-proxy-and-reg)# user-info sbc-user-info <index, e.g.,
1>
(sbc-user-info-1)# username JohnDee
(sbc-user-info-1)# <activate | exit>

To delete a specific user, use the no command:
(sip-def-proxy-and-reg)# no user-info sbc-user-info <index,
e.g., 1>

To view all table entries:
(sip-def-proxy-and-reg)# user-info sbc-user-info display
---- sbc-user-info-0 ----
local-user (JohnDee)
username (userJohn)
password (s3fn+fn=)
ip-group-id (1)
status (not-resgistered)
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the user and is used as the Request-URI user part for
the AOR in the database.
The valid value is a string of up to 10 characters.
Defines the username for registering the user when
authentication is necessary.
The valid value is a string of up to 40 characters.
Defines the password for registering the user when
authentication is necessary.
The valid value is a string of up to 20 characters.
Assigns an IP Group to the user and is used as the Request-
URI source host part for the AOR in the database.
For configuring IP Groups, see ''Configuring IP Groups'' on
page 349.
(Read-only field) Displays the status of the user - "Registered"
or "Not Registered".
762
Mediant 800B Gateway and E- SBC
Description
Document #: LTRT-10296