Configuring Tls Server Certificate Expiry Check - AudioCodes Mediant 800B User Manual

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

10.8

Configuring TLS Server Certificate Expiry Check

You can also configure the TLS Server Certificate Expiry Check feature, whereby the
device periodically checks the validation date of the installed TLS server certificates. You
can
also
(acCertificateExpiryNotification) at a user-defined number of days before the installed TLS
server certificate is to expire. The trap indicates the TLS Context to which the certificate
belongs.
Note:
TLS certificate expiry check is configured globally for all TLS Contexts.
To configure TLS certificate expiry checks and notification:
1.
Open the TLS Contexts page (Configuration tab > System menu > TLS Contexts).
2.
Scroll down the page to the TLS Expiry Settings group:
3.
In the 'TLS Expiry Check Start' field, enter the number of days before the installed TLS
server certificate is to expire at which time the device sends an SNMP trap event to
notify of this.
4.
In the 'TLS Expiry Check Period' field, enter the periodical interval (in days) for
checking the TLS server certificate expiry date. By default, the device checks the
certificate every 7 days.
5.
Click the Submit TLS Expiry Settings button.
User's Manual
configure
the
device
Figure 10-10: TLS Expiry Settings Group
Mediant 800B Gateway and E- SBC
to
send
a
notification
118
SNMP
trap
event
Document #: LTRT-10296

Advertisement

Table of Contents
loading

Table of Contents