AudioCodes Mediant 800B User Manual page 133

Media gateway & enterprise session border controller (e-sbc)

Hide thumbs Also See for Mediant 800B:

Table of Contents

User's Manual

Configure an Ethernet Device according to the parameters described in the table

Table 12-3: Ethernet Device Table Parameter Descriptions

[DeviceTable_Index]

[DeviceTable_VlanID]

Underlying Interface

underlying-if

[DeviceTable_UnderlyingInterface]

[DeviceTable_DeviceName]

Defines an index number for the new table row.

Note: Each row must be configured with a unique index.

Defines a VLAN ID for the Ethernet Device.

The valid value is 1 to 3999. The default value is 1.

Note: Each Ethernet Group must have a unique VLAN ID.

Assigns an Ethernet Group to the Ethernet Device. For

configuring Ethernet Groups, see Configuring Ethernet Port

Groups on page 129.

Note: The parameter is mandatory.

Defines a name for the Ethernet Device. This name is used to

associate the Ethernet Device with an IP network interface in the

Interface table ('Underlying Device' field - see ''Configuring IP

Network Interfaces'' on page 135) and/or with a static route in the

Static Route table ('Device Name' field - see ''Configuring Static

IP Routing'' on page 143).

Mediant 800B Gateway and E- SBC