Restoring Defaults Through Ini File - AudioCodes Mediant 800B User Manual

Media gateway & enterprise session border controller (e-sbc)

Hide thumbs Also See for Mediant 800B:

Table of Contents

User's Manual

Restoring Defaults through ini File

You can restore the device to factory defaults by loading an empty ini file to the device.

This is done using the Web interface's Configuration File page (see ''Backing Up and

Loading Configuration File'' on page 775). If the ini file does include content (e.g.,

parameters), ensure that they are on lines beginning with comment signs (i.e., semicolons

";") so that the device ignores them.

LAN IP address and the Web interface's login user name and password.

The only settings that are not restored to default are the management (OAMP)

Mediant 800B Gateway and E- SBC

46. Restoring Factory Defaults