Pre-Configured Ip Groups - AudioCodes Mediant 800B User Manual

User's Manual

To configure the Call Survivability mode:
1. Open the General Settings page (Configuration tab > VoIP menu > CRP > General
Settings).
2. From the 'CRP Survivability Mode' drop-down list, select the required mode.
3. Click Submit.
37.3

Pre-Configured IP Groups

For CRP, the device is pre-configured with the following IP Groups in the IP Group table:
Table 37-1: Pre-configured IP Groups in the IP Group Table
Index
1
2
3
These IP Groups represent the following IP entities:

"Users" IP Group: LAN users (e.g., IP phones) at the branch office

"Server" IP Group: Server (e.g., hosted IP PBX at the Enterprise's headquarters)

"Gateway" IP Group: Device's interface with the PSTN
These IP Groups are used in the IP-to-IP routing rules to indicate the source and
destination of the call (see ''Pre-Configured IP-to-IP Routing Rules'' on page 706).
Notes:
•
These IP Groups cannot be deleted and additional IP Groups cannot be
configured. The IP Groups can be edited, except for the fields listed above, which
are read-only.
•
For accessing the IP Group table and for a description of its parameters, see
''Configuring IP Groups'' on page 349.
Version 7.0
Type
User
Server
Server
705 Mediant 800B Gateway and E- SBC
37. CRP Configuration
Description
Users
Proxy
Gateway