Configuring Trunk Group Settings Table - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
Trunk Group ID
trunk-group-id
[TrunkGroup_TrunkGroupNum]
Tel Profile Name
tel-profile-id
[TrunkGroup_ProfileName]
22.2

Configuring Trunk Group Settings Table

The Trunk Group Settings table lets you configure various settings per Trunk Group which
are configured in Configuring Trunk Groups on page 477. The main configuration includes
the following:

Channel select method, which defines how the device allocates incoming IP-to-Tel
calls to the channels of a Trunk Group.

Registration method for registering Trunk Groups to remote IP servers (Serving IP
Group).
The Trunk Group Settings table also provides an Action drop-down button with commands
that let you perform various actions per configured Trunk Group:

Lock / Unlock: Locks (blocks) a Trunk Group in order to take its member trunks out-
of-service. For more information, see 'Locking and Unlocking Trunk Groups' on page
770.

Register / Un-Register: Initiates a registration request for the Trunk Group with a
Serving IP Group. For more information, see the description of the 'Registration Mode'
parameter of the Trunk Group Settings table in this section.
The following procedure describes how to configure settings for Trunk Groups through the
Web interface. You can also configure it through ini file (TrunkGroupSettings) or CLI
(configure voip/gw hunt-or-trunk-group trunk-group-setting).

To configure Trunk Group settings:
1. Open the Trunk Group Settings table (Setup menu > Signaling & Media tab >
Gateway folder > Trunks & Groups > Trunk Group Settings).
2. Click New; the following dialog box appears:
Version 7.2
Defines the Trunk Group ID for the specified channels. The same
Trunk Group ID can be assigned to more than one group of
channels. If an IP-to-Tel call is assigned to a Trunk Group, the IP
call is routed to the channel(s) pertaining to that Trunk Group ID.
The valid value can be 0 to 119.
Assigns a Tel Profile to the Trunk Group.
To configure Tel Profiles, see 'Configuring Tel Profiles' on page
439.
479
Description
Mediant 800B Gateway & E-SBC
22. Trunk Groups