Table of Contents
Advertisement
VTL
5. (Optional) To reduce the number of cartridges displayed in the table, enter a barcode or
barcode range in the Barcode Filter box and click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to indicate a wildcard.
Separate multiple entries with commas, and do not use spaces.
For example, enter AAA* to display all cartridge barcodes beginning with AAA. Or enter
AAA010-AAA020 to display all barcodes in the specified range. Click the Quick Tip
icon [?] for additional examples.
6. Select the cartridges to unload.
I
7. Click Apply.
Cartridges are moved to a previous storage slot if available. Otherwise, they are moved
to the first available storage slot.
8. Return the partition to an online state (see
Remote Host Access
The Remote Host Access page allows you to configure virtual media changers and tape
drives on the ETERNUS CS800 to communicate with Fibre Channel hosts (initiators). You
can add, edit, and delete hosts as well as view Fibre Channel target ports on the system.
I
To access the Remote Host Access page, on the VTL page, click the Remote Host
Access tab.
The Remote Host Access page contains the following tabs:
"Remote Host Mapping"
●
"Remote Hosts"
●
"Targets"
●
"Target Usage"
●
222
If necessary, use the controls at the bottom of the table to navigate between
multiple pages of results. Select the number of rows to display in the Show
drop-down box.
If you do not create and associate a host access group with a partition, the virtual
devices are not visible from the host, and drives cannot be destinations for move
operations.
"Changing Partition Mode" on page
Configuration
211).
U41840-J-Z125-7-76
Hide quick links:
Advertisement
Table of Contents
