Remote Management; Accessing Remote Management - Fujitsu ETERNUS CS800 S5 User Manual

Remote Management

The ETERNUS CS800 system utilizes a Web-based interface which allows you to configure
and manage the system via Web pages from a remote workstation on the same network (a
Command Line Interface is also available, see the ETERNUS CS800 S5 Command Line
Interface Guide). This chapter gives you an overview about the ETERNUS CS800 Web
interface, how to access it and information about the Home page. The Web pages are
described in the subsequent chapters as follows:
Chapter
●
CS800 using guided procedures.
Chapter
●
a glance.
Chapter
●
Chapter
●
nents and system performance.
Chapter
●
service tickets.
Chapter
●
replication, and system settings.
Chapter
●
system.

Accessing Remote Management

Access the remote management console using a Web browser on a workstation that is on
the same network as the ETERNUS CS800.
See the following sections for more information about accessing ETERNUS CS800 remote
management:
"Supported Browsers"
●
"Logging On to the ETERNUS CS800"
●
"Logging Off of the ETERNUS CS800"
●
U41840-J-Z125-7-76
"Configuration Wizards" on page 137
"Home Page" on page 177
"Replication" on page 341
"Status" on page 389
"Alerts" on page 419
"Configuration" on page 187
"Utilities" on page 429
allows you to set up the ETERNUS
allows you to view important system information at
allows you to manage data replication activities.
allows you to view the status of the hardware compo-
allows you to view administration alerts and resolve
allows you to configure storage presentation, data
allows you to run diagnostic tools and maintain the
125