System
To access the Storage Encryption page, on the Security page, click the Storage tab (see
Figure
191).
Figure 191: Storage Encryption page
Use the Storage Encryption page to perform the following tasks:
Enable Storage Encryption and specify the encryption type (see
●
Encryption" on page
Monitor initial storage encryption process (see
●
Enable Storage Encryption
To enable the Storage Encryption:
1. select a encryption type "AES" or "Fujitsu" from the pull down list
●
●
2. Click Enable.
V
310
310).
AES: Advanced Encryption Standard (AES: Standard encryption used for infor-
mation processing by the US federal government)" is a standardized encryption
method. The ETERNUS CS800 adopt the AES 128-bit encryption.
Fujitsu: "Fujitsu" is an encryption method which uses a Fujitsu proprietary
algorithm. Compared to AES, its practical security level is almost equal while it
allows faster processing than AES.
CAUTION!
Once encrypted, date on the storage array cannot be changed to non-encrypted
data.
"Enable Storage
"Monitor Initial Encryption" on page
Configuration
311).
U41840-J-Z125-7-76