Table of Contents
Advertisement
Server
Connect the power cord with the insulated connector to the power supply unit of the
●
server, and plug the power plug into a grounded outlet on the mains socket strip on the
rack (see Technical Manual of the rack).
I
Using the cable clamp
You can secure the power cords in a cable clamp to ensure that the insulated connectors
cannot be disconnected from the server accidentally.
Figure 11: Cable clamp
Thread the power cord through the cable clamp (1).
●
Pull the cable clamp up (2).
●
Press the cable clamp down until it engages to secure the cable (3).
●
54
A phase redundancy in the power supply of the server can be set up if each of the
power supply units is either connected to two different phases or to two separate
circuits of the internal power supply network.
Hardware Description and Basic Operations
U41840-J-Z125-7-76
Hide quick links:
Advertisement
Table of Contents
