Scale - Fujitsu ETERNUS CS800 S5 User Manual

Components of an ETERNUS CS800 S5 System

Scale

This version provides a midrange amount as well as fast network throughput and full data
storage facility. It includes the following features:
1 server unit with 2 CPUs (8 cores / 16 threads each) and 256GB RAM
●
1 storage base module (DX80 S2) with a usable capacity of 16TB (2TB disks) or 24TB
●
(3TB disks) or 32TB (4TB disks).
3 x 1GbE ports for NFS and CIFS (to the customer LAN)
●
Optionally: 1 to 9 storage expansion modules, with 16TB, 24TB or 32TB usable
●
capacity.
Optionally: 4 x 10GbE (factory installed option/field upgradeable)
●
Optionally: 8 x 1GbE (factory installed option)
●
Optionally: 4 x 8GbFC (always factory installed)
●
Optionally: Hot Spares in ETERNUS DX80 S2 (factory enabled)
●
●
●
The Scale model uses an DX80 S2 storage array with large capacity, highly cost effective
Nearline SAS disks (Serial Attached SCSI). Twelve disks of 3.5'' size with a capacity of 2TB,
3TB or 4TB each and a speed of 7,200 rpm are implemented to each module of the storage
array. Always six disks are building up a RAID 6 (4+2) disk group, i.e. there are two RAID
6 groups in each storage module. In addition, sixteen SAS disks of size 2.5" with a capacity
of 900GB each and a speed of 10,000 rpm are implemented in the server. Two disks are
reserved as hot spare. Always two of the further disks are building up a RAID 1 disk group.
One disk group is used by the operating system and the other six groups are used to store
the backup metadata.
36
The 1st storage expansion shelf of the DX80 S2 will be equipped with 12 x Hot
Spare disks (2TB, 3TB or 4TB)
This will reduced the max. capacity to 144/ 216/ 288TB
System Description
U41840-J-Z125-7-76