Accent - Fujitsu ETERNUS CS800 S5 User Manual

OST
Editing a Mapped IP Address
Edit a mapped IP address to route traffic sent to the target data IP address to a different
replication IP address.
To edit a mapped IP address:
4. Select the mapped IP address and click Edit.
The Edit Target Data IP Mapping window displays (see
Figure 166: Edit Target Data IP Mapping
5. In the Target Replication IP box, enter the replication IP address to map the data IP
address to.
I
6. Click Apply.
Deleting a Mapped IP Address
Delete a mapped IP address if traffic sent to the target data IP address no longer needs to
be routed to a replication IP address.
To delete a mapped IP address, select the IP address and click Delete.
I

Accent

Use the Accent page to enable or disable Accent. Fujitsu Accent software accelerates
backups and reduces network bandwidth requirements by distributing deduplication
between the backup server and the ETERNUS CS800. OST data sent from the media
server to the ETERNUS CS800 can be encrypted using AES (Advanced Encryption
Standard) encryption methods.
To access the Accent page, on the OST page, click the Accent tab (see
266
If you are editing a mapped IP address, you cannot change the target data IP
address.
You can select multiple mapped IP addresses to delete at once.
Configuration
Figure 166).
Figure 167).
U41840-J-Z125-7-76