Handling Instructions For The Rack; Unpacking And Checking The Delivery Unit; Detaching And Transporting The Delivery Unit - Fujitsu ETERNUS CS800 S5 User Manual

Installing the Rack

Handling Instructions for the Rack

V

Unpacking and Checking the Delivery Unit

1. Unpack all the individual parts of the delivery unit.
2. Check the delivery for damage sustained during transport.
3. Check whether the delivery matches the specifications in the delivery note.
V
The rack is shipped on a pallet to which it is secured.
Required tools:
6 mm hexagon key (provided)
●
Long Torx screwdriver (TX25)
●

Detaching and Transporting the Delivery Unit

Detaching from the wooden pallet
The unit is seated on the pallet and is secured with six metal retaining brackets.
●
U41840-J-Z125-7-76
CAUTION!
The activities described in this chapter may only be performed by technicians,
●
service personnel or technical specialists. Ignoring the instructions in this
manual can result in personal injury or damage to equipment.
For safety reasons, four people are required to install the rack model
●
because of its weight and size.
When the unit is transported, it may be tilted at most by 15°.
●
The unit must remain in the original package until it has reached its installation
●
location.
Make sure the floor at the final place of installation has sufficient load-bearing
●
capacity.
Always ensure that the tilting protection is mounted when you set up the rack
●
(risk of tipping over).
CAUTION!
Should you discover that damage has occurred during transport or that the delivery
does not match the delivery note, notify your supplier immediately!
Handling Instructions for the Rack
83