Fujitsu ETERNUS CS800 S5 User Manual page 234

VTL
I
7. In the Destination Location drop-down box, select the type of location you want to
move the cartridge to (Drive, Storage Slot, I/E Slot).
8. Select the destination location to move the cartridge to.
I
9. Click Apply.
10. Return the partition to an online state (see
Media Unload
Use the Media Unload page to perform a bulk unload of virtual tape cartridges from drives
or I/E slots.
I
V
To access the Media Unload page, on the Media page, click the Unload tab (see
Figure 139).
220
If necessary, use the controls at the bottom of the table to navigate between
multiple pages of results. Select the number of rows to display in the Show
drop-down box.
The destination section displays empty drives, storage slots, and I/E slots.
Offline drives are not displayed. A drive might be offline if it has not been
mapped to a host (see
If you do not create and associate a host access group with a partition, the virtual
devices are not visible from the host, and drives cannot be destinations for move
operations (see "Remote Host Access" on page
CAUTION!
If you unload a virtual tape cartridge from a drive while a backup to that drive is in
progress, the backup job will fail.
"Remote Host Access" on page
"Changing Partition Mode" on page
222).
222).
U41840-J-Z125-7-76
Configuration
211).