Fujitsu ETERNUS CS800 S5 User Manual page 408

Hardware
The Host Bus Adapters section displays the following information about each Fibre
Channel or SAS card:
Component - The name of the Fibre Channel card or SAS card.
●
Click the name of the card to view detailed information for the card below.
Status - The status of the Fibre Channel card or SAS card.
●
●
●
●
The Fibre Channel Controller SAS HBA section displays the following information about
the ports in the selected Fibre Channel or SAS controller:
Component - The number of Fibre Channel port or SAS card.
●
Value - The throughput capacity of the port (if connected).
●
Status - The status of the Fibre Channel port.
●
●
●
Network Ports
The Network Ports page allows you to view information about Ethernet ports in the system.
The ETERNUS CS800 includes six or eight Ethernet ports (depending on the configu-
ration).
To access the Network Ports page, on the Details page, click the Network Ports tab (see
Figure 238).
394
Normal - (Green) The component is operating correctly.
Attention - (Yellow) There is a problem with the component .
Failed - (Red) The component has failed.
Up - (Green) The port is connected.
Down - (Green) The port is not connected.
Status
U41840-J-Z125-7-76