Fujitsu ETERNUS CS800 S5 User Manual page 478

ETERNUS CS800 S4/S5 Hardware
Unlocking the HDD Module
Figure 296: Unlocking a 2.5-inch HDD Module
1. Release the locking mechanism by pressing the locking button (1).
2. Push the handle of the HDD module fully in the direction of the arrow (2).
The HDD module is now unlocked.
3. Wait about 30 seconds to allow the hard disk drive to spin down.
4. Pull the HDD module completely out of its bay (see
Figure 297: Disconnecting a 2.5-inch HDD
510
1
1
2
Removal and Replacement Procedures for CRUs
Figure 298).
U41840-J-Z125-7-76