Fujitsu ETERNUS CS800 S5 User Manual page 349

Configuration
To stop or start the AISConnect service:
1. From the AISConnect page, click the Control tab.
2. Do one of the following actions:
●
●
Remote Access Policies
Use the Remote Access Policies page to view the current remote access policies status,
or to enable or disable remote access policies (see
Figure 208: AIS Remote Access Policies
Remote access policies must be enabled for a Fujitsu support specialist to remotely
connect to the system using SSH or HTTP. If remote access policies are disabled, remote
connection using SSH or HTTP is not possible.
To enable or disable remote access policies:
1. From the AISConnect page, click the Remote Access Policies tab.
The Remote Access Policies page displays the current remote access policies status.
2. Do one of the following actions:
●
●
U41840-J-Z125-7-76
Click Start to start the AISConnect service.
Click Stop to stop the AISConnect service.
Click Enable to enable remote access policies.
Click Disable to disable remote access policies.
Figure 208).
Notifications
335