Fujitsu ETERNUS CS800 S5 User Manual page 475

Removal and Replacement Procedures for CRUs
Securing power cords
Figure 293: Securing power cord
Thread the power cord through the cable clamp (1).
●
Pull the cable clamp up (2).
●
Press the cable clamp down until it engages to secure the cable (3).
●
Hard Disk Drive
The hard disk drives which can be ordered for the ETERNUS CS800 server are supplied
already mounted in an installation frame so that defective hard disk drives can be replaced
during operation. The hard disk drive and installation frame together make up the HDD
module.
U41840-J-Z125-7-76
ETERNUS CS800 S4/S5 Hardware
507