Fujitsu ETERNUS CS800 S5 User Manual page 226

VTL
Partitions General
Use the Partitions General page to configure the Auto Export feature. When a tape is
exported by the backup application, it is placed in a virtual I/E slot. After this, one of the
following actions occurs:
(Default) If Auto Export is enabled, the media is removed from the virtual I/E slot.
●
If Auto Export is disabled, the media remains in the virtual I/E slot.
●
To access the Partitions General page, on the Partitions page, click the General tab (see
Figure 135).
Figure 135: Partitions General Page
To configure Auto Export:
1. Select the Enable Auto Export check box to enable Auto Export.
Or clear the Enable Auto Export check box to disable Auto Export.
2. Click Apply.
212
Configuration
U41840-J-Z125-7-76