Table of Contents
Advertisement
Software Upgrade
6. Read and follow the instructions in each of the pre-flight checks. The pre-flight checks
can differ depending on the type of upgrade, but typical checks include the following:
7. After you have completed all pre-flight checks, confirm that you are ready to continue
by selecting the Confirmation check box.
8. To begin the upgrade process, click Install.
Read the onscreen information to learn what to expect during the upgrade. The bottom
status bar displays installation progress, and a message displays if a reboot is required.
Depending on the type of upgrade, the ETERNUS CS800 may be placed in service
mode for about 30 minutes. While in service mode, the system will shut down all backup
and replication services. If necessary, the ETERNUS CS800 will restart after the
upgrade is complete.
I
I
446
Delete all outstanding administration alerts (see
●
Close all outstanding service tickets (see
●
Stop all active backup jobs (see your backup application).
●
Make sure all replication jobs are complete or nearly complete (see
●
cation" on page
341).
Make sure space reclamation is complete or nearly complete (see
●
Reclamation" on page
Download a system diagnostics file and transfer the file to a safe repository off
●
of the ETERNUS CS800 (see
diagnostics file can help in resolving problems if they occur.
The Install button is disabled if there are any outstanding administration alerts
or service tickets.
If you decide not to install the software upgrade after uploading it, click Remove
to remove the current upload from the ETERNUS CS800.
"Service Tickets" on page
438).
"System Diag File" on page
"Admin Alerts" on page
420).
"Repli-
"Space
429). The system
U41840-J-Z125-7-76
Utilities
419).
Hide quick links:
Advertisement
Table of Contents
