Current Activity Overview - Fujitsu ETERNUS CS800 S5 User Manual

Current Activity Overview

Current Activity Overview
The Current Activity overview on the Home page (see
information about system activity that occurred in the previous minute:
Inline - The inline data flow throughput (in MB/s). Inline data flow includes deduplicated
●
and non-deduplicated backup data as well as received replication data. Click to view
detailed statistics for inline performance (see
Replication Throttle - The system replication throttle currently in effect (in KB/s or
●
MB/s). When a constant throttle is enabled, the ETERNUS CS800 limits the amount of
data it sends during source replication so that it does not exceed the specified
bandwidth. Click to enable or disable system throttling (see
on page
Ethernet - The amount of data received (In) and sent (Out) by all Ethernet ports (in
●
MB/s). Click to view details statistics for Ethernet performance (see
page
Fibre Channel - The amount of data received (In) and sent (Out) by all Ethernet ports
●
(in MB/s). Click to view details statistics for Fibre Channel performance (see
Channel" on page
OST Service - The status of the OST service. OST settings can be configured in
●
Ready, Stopped, or Verifying state. The OST server is available for backup only in
Ready state.
●
●
●
●
●
●
184
232).
399).
402).
Inline (OpDup) - The inline data flow throughput (in MB/s). Inline data flow repre-
sents the original, native size of the data protected by the system.
Ethernet In (OpDup) - The amount of data received by all Ethernet ports (in MB/s).
This amount represents the reduced size of the data protected by the system (after
deduplication and compression on the media servers).
OpDup Bandwidth Reduction - The percentage by which network bandwidth utili-
zation was reduced by using Optimized Duplication.
I
Accent activity displays only if System Accent is currently enabled or was
previously enabled (see
Inline (Accent) - The inline data flow throughput (in MB/s). Inline data flow repre-
sents the original, native size of the data protected by the system.
Ethernet In (Accent) - The amount of data received by all Ethernet ports (in MB/s).
This amount represents the reduced size of the data protected by the system (after
deduplication and compression on the media servers).
Accent Bandwidth Reduction - The percentage by which network bandwidth utili-
zation was reduced by enabling Accent.
Figure
"Inline" on page
"Accent" on page 266).
Home Page
121) displays the following
398).
"Replication Configuration"
"Ethernet" on
"Fibre
U41840-J-Z125-7-76