Fujitsu ETERNUS CS800 S5 User Manual page 270

OST
2. Enter information about the LSU:
I
●
●
3. (Optional) Select the Enable Automatic Image Replication check box to automatically
replicate (duplicate) data on the LSU to a remote LSU on another ETERNUS CS800.
Automatic Image Replication (AIR) is disabled by default. If enabled, data on an LSU is
automatically replicated to a remote LSU that resides on a ETERNUS CS800 in a
different NetBackup domain. The timing of the duplication, as well as the backup
images that are duplicated, are determined by the storage lifecycle policies (SLPs)
configured in NetBackup.
OST AIR requires NetBackup 7.1 or higher. For information about configuring
NetBackup for Automatic Image Replication, see the ETERNUS CS800 OST Guide.
I
4. If Automatic Image Replication is enabled, select the replication target you want to
replicate images to. (You can select only a single target.) When images are replicated,
data will be sent to the selected target.
5. If Automatic Image Replication is enabled, specify the following information:
●
●
●
6. Click Apply.
256
If you are editing an LSU, the Name option cannot be changed.
Physical Capacity - (Specific capacity LSUs only) Enter the physical capacity of
the LSU (1 to 1048576 GB).
The physical capacity cannot be changed if the LSU has more than zero currently
active connections. The number of active connections is displayed on the LSU page
(see "Logical Storage Unit List" on page
Description - (Optional) Enter a brief description of the LSU.
You must configure at least one remote user before you can enable Automatic
Image Replication (see
Remote Storage Server Name - The name of the remote storage server (on the
target ETERNUS CS800) to replicate data to. The source ETERNUS CS800 and
target ETERNUS CS800 must reside in different NetBackup domains.
I
To configure the target ETERNUS CS800, see
Target" on page
Remote LSU Name - The name of the LSU in the remote storage server that will
receive the replicated data.
Remote User - The OST user credentials to use for authentication on the remote
(target) ETERNUS CS800. The selected remote user must match a local user on the
Configuration > OST > Manage Users page on the target ETERNUS CS800 (see
"Manage Users" on page
252).
"Manage Remote Users" on page
234.
257).
Configuration
260).
"Adding a Replication
U41840-J-Z125-7-76