Step 2: Proxy - Fujitsu ETERNUS CS800 S5 User Manual

AIS Connect
Figure 113: AISConnect Wizard: About

Step 2: Proxy

If your network environment requires use of a proxy server, you must specify the proxy
server settings to enable AISConnect (see
1. Enter the proxy server information:
●
●
●
●
●
●
●
2. Click Next.
174
Server - Enter the IP address of the proxy server.
Port - Enter the port number of the proxy server.
Authentication Enabled - Select the check box if the proxy server requires authen-
tication.
NTLM Authentication Enabled - Select the check box if the proxy server requires
NTLM (NT LAN Manager) authentication.
Username - Enter the username to use for proxy authentication.
Password - Enter the password to use for proxy authentication.
Country - Select the country where the ETERNUS CS800 is located.
Figure 114):
Configuration Wizards
U41840-J-Z125-7-76