Fujitsu ETERNUS CS800 S5 User Manual page 317

Configuration
Changing Web Passwords
Use the Web passwords when logging onto the remote management console as an admin-
istrator or monitor (see
To change the Web passwords:
1. Under Web Administrator Password or under Web Monitor Password, enter the
following information:
●
●
●
I
I
2. Click Apply.
Enabling CLI Accounts
The CLI accounts provide access to the ETERNUS CS800 command line interface as an
administrator or monitor.
I
To enable or disable the CLI accounts:
1. Under CLI Administrator Login Settings or under CLI Monitor Login Settings, do
one of the following steps:
●
●
2. Click Apply.
U41840-J-Z125-7-76
"Accessing Remote Management" on page
Old Password - Enter the old password.
New Password - Enter the new password.
Confirm New Password - Enter the new password again to confirm it.
The default Web Administrator password is spcc. The default Web Monitor
password is password.
Passwords are limited to 15 characters. All alphanumeric characters are
allowed, as well as underscores ( _ ) and hyphens ( - ).
For more information about using the CLI, see the ETERNUS CS800 S5 Command Line
Interface (CLI) Guide.
Select the Enable CLI Login check box to enable the CLI account.
Clear the Enable CLI Login check box to disable the CLI account.
System
125).
303