Fujitsu ETERNUS CS800 S5 User Manual page 454

Space Reclamation
Space Reclaimed - The amount of disk space reclaimed. This value is 0 while space
●
reclamation is running and while display the total reclaimed value after space recla-
mation is complete.
Use the General page to perform the following tasks:
To start space reclamation, click Start.
●
To stop space reclamation, click Stop.
●
To update the display while space reclamation is running, click Refresh.
●
Space Reclamation Status
Space reclamation can have one of the following statuses:
Reclamation Completed - Space reclamation completed without errors.
●
Reclamation Started by User - Space reclamation was started manually by a user.
●
Reclamation Interrupted - Space reclamation was interrupted and must be restarted.
●
Reclamation Interrupted by User - Space reclamation was interrupted by a user and
●
must be restarted.
Reclamation Interrupted - Error Encountered - Space reclamation was interrupted
●
because an error was encountered and must be restarted.
Reclamation Interrupt by User - Cannot be interrupted at this time - Because the
●
system is in a Low Space state, space reclamation cannot be stopped. Wait for space
reclamation to finish freeing up disk space.
Reclamation Completed - No Candidates To Delete - Space reclamation completed,
●
but there were no candidates for reclamation.
Reclaim Existing Blockpool Freed Space - The existing blockpool space has been
●
reclaimed for use.
Stage 1 of 4 - Reclaim Disk Space (Initial).
●
Stage 2 of 4 - Calculating Deletion Candidates.
●
Stage 3 of 4 - Deleting New Candidates.
●
Stage 4 of 4 - Reclaim Disk Space.
●
440
Utilities
U41840-J-Z125-7-76