Replacing The Remote Management Module (Rmm3) - Fujitsu PRIMERGY CX120 S1 Service Supplement Manual

Ê Insert the replacement PCI riser card into the onboard riser card slot and
press down firmly. Ensure that the card is fully seated in the slot.
Ê Reinsert the expansion card into the PCI connector on the riser card as
described in section "Replacing expansion cards" on page
Ê Close the server as described in
4.5 Replacing the Remote Management Module
(RMM3)
PRIMERGY CX120 S1

Replacing the Remote Management Module (RMM3)

section "Closing the server" on page
Service Supplement
40.
The optional RMM3
Remote Management
Module extends the basic
BMC functionality by a
dedicated Management
LAN connection.
Part number:
INE:AXXRMM3
31.
45