Storing The Bios Information And The Remote Management Controller Information - Fujitsu PRIMERGY RX200 S4 User Manual

4.3.1 Storing the BIOS Information and the Remote
Management Controller Information
Store the BIOS information and the Remote Management Controller information according to the
following procedures.
Confirm that the USB floppy disk drive is connected before turning on the server power.
Configure settings in "7.2.4 Boot Options Submenu" ( p.181) to give the highest priority to the USB
floppy disk drive.
Before starting the operation, if the "OS Boot Monitoring" function of ServerView is enabled, disable it
(it is disabled by default). If you start up the system while the "OS Boot Monitoring" function remains
effective, the operation of the server may become unpredictable at such times as an abrupt power
interruption or restart.
If it is necessary to operate the server with the "OS Boot Monitoring" function enabled, enable the
function after storing the BIOS/Remote Management Controller information. For details of ServerView,
refer to "ServerView User's Guide".
1
Insert the "Server Management Tools" disk and turn on the server.
The window for selecting a keyboard appears.
Please select:
1 = JP Keyboard
2 = US Keyboard
Your selection
2
Select a keyboard.
Select [1] for Japanese keyboard or select [2] for English keyboard. Japanese keyboard is
selected by default.
3
When the DOS Prompt window appears, enter the following command and
press the [Enter] key.
A:\ SMT>biossave.bat
4
If the BIOS information or the Remote Management Controller information is
stored successfully, the following message appears.
Success !
5
Confirm that the stored information files are created.
Enter the following command to display the stored information files which are created.
A:\SMT>dir
The BIOS information has been stored. The server can now be turned off safely.
PRIMERGY RX200 S4 User's Guide
83