Remote Management Unit (Rmu) - Fujitsu BS2000 SE Series Operating Manual

Additive Components

4.2.3.2 Remote Management Unit (RMU)

Alternatively to the OCP, you can operate the tape library conveniently via the administration LAN using a web-
based user interface, the Remote Management Console (RMU). The RMU largely offers the same functionality as
the OCP.
A prerequisite for access to the RMU is that a network connection exists and a LAN address is configured (see the
"Operation and Administration" manual [ ]).
You call the RMU in the browser by entering the following URL in the address bar:
http://<IP address>
or
http://<name>
You can store a corresponding link in the SE Manager on the MU (see the "Operation and Administration" manual
]) and use it as an alternative for calling the RMU.
The first page you are shown is the device's login page, which enables you to log in under user accounts (they are
named Guest and Admin
account is reserved for Customer Support. Each of these accounts is protected by a password. You should change
the passwords which are preset when supplied (see
After you have logged in successfully, you are shown the first page under
overview containing the
The RMU supports several languages, English being the default. The functionality of the RMU is described in detail
in the manual
The functionality of the RMU is described in detail in the "ETERNUS LT40 S2 / LT60 S2" manual. You can
download the manual at the address
Support -> IT Products and Systems -> Storage
> Go to
ETERNUS ->
product group
>
5
(if the name is configured in the DNS)
or User and Administrator
Library Information :
https://support.ts.fujitsu.com
product family
, depending on the library's firmware version). The
"Changing the password of the access account"
Identity
:
Browse for Product
. In
ETERNUS LT ->
product
Service
).
> Library , which displays the
select product line
ETERNUS LT40 S2.
[5
Storage -
63