Clearing Ipv6 Mbgp Information; Ipv6 Mbgp Configuration Example - HP A6600 Configuration Manual

To do...
Reset specified IPv6 MBGP
connections

Clearing IPv6 MBGP information

To do...
Clear dampened IPv6 MBGP
routing information and release
suppressed routes
Clear IPv6 MBGP route flap
statistics

IPv6 MBGP configuration example

Network requirements
As shown in
• IPv6 PIM-SM 1 is in AS 100 and IPv6 PIM-SM 2 is in AS 200. OSPFv3 is the IGP in the two ASs,
and IPv6 MBGP runs between the two ASs to exchange IPv6 multicast route information.
The multicast source belongs to IPv6 PIM-SM 1, and the receiver belongs to IPv6 PIM-SM 2.
•
Configure the respective POS 5/0/0 of Router A and Router B as the C-BSR and C-RP of the
•
respective IPv6 PIM-SM domains.
Figure 103 Network diagram for IPv6 MBGP configuration
AS 100
Router A
IPv6 PIM-SM 1
IPv6 MBGP peers
Device
Source
Use the command...
reset bgp ipv6 multicast
{ as-number | ipv6-address | all |
group ipv6-group-name | external
| internal }
Use the command...
reset bgp ipv6 multicast
dampening [ ipv6-address
prefix-length ]
reset bgp ipv6 multicast flap-info
[ ipv6-address/prefix-length |
regexp as-path-regexp |
as-path-acl as-path-acl-number ]
Figure 103:
AS 200
POS5/0/0
GE1/0/1
Source
Interface IP address
- 1002::100/64
Router B
POS5/0/0
S2/0/1 S2/0/0
Router D
IPv6 PIM-SM 2
Device
Router C
383
Remarks
Available in user view
Remarks
Available in user view
Available in user view
Receiver
Router C
Interface IP address
GE1/0/1 3002::1/64