HP A6600 Configuration Manual page 201

[RouterA-GigabitEthernet0/0/0] quit
[RouterA] interface
[RouterA-GigabitEthernet0/0/3] pim sm
[RouterA-GigabitEthernet0/0/3] quit
[RouterA] interface GigabitEthernet 0/0/1
[RouterA-GigabitEthernet0/0/1] pim sm
[RouterA-GigabitEthernet0/0/1] quit
[RouterA] interface loopback 0
[RouterA-LoopBack0] pim sm
[RouterA-LoopBack0] quit
The configuration on Router B, Router C and Router D is similar to the configuration on Router A. The
specific configuration steps are omitted here.
# Configure PIM domain borders on Router C.
[RouterC] interface GigabitEthernet 0/0/1
[RouterC-GigabitEthernet 0/0/1] pim bsr-boundary
[RouterC-GigabitEthernet 0/0/1] quit
[RouterC] interface
[RouterC-GigabitEthernet 0/0/2] pim bsr-boundary
[RouterC-GigabitEthernet 0/0/2] quit
[RouterC] interface
[RouterC-GigabitEthernet 0/0/3] pim bsr-boundary
[RouterC-GigabitEthernet 0/0/3] quit
The configuration on Router A, Router B and Router D is similar to the configuration on Router C. The
specific configuration steps are omitted here.
Configure C-BSRs and C-RPs
3.
# Configure Loopback 0 on Router A as a C-BSR and a C-RP.
[RouterA] pim
[RouterA-pim] c-bsr loopback 0
[RouterA-pim] c-rp loopback 0
[RouterA-pim] quit
The configuration on Router C and Router D is similar to the configuration on Router A. The specific
configuration steps are omitted here.
Configure MSDP peers
4.
# Configure an MSDP peer on Router A.
[RouterA] msdp
[RouterA-msdp] peer 192.168.1.2 connect-interface GigabitEthernet 0/0/1
[RouterA-msdp] quit
# Configure MSDP peers on Router C.
[RouterC] msdp
[RouterC-msdp] peer 192.168.1.1 connect-interface GigabitEthernet 0/0/1
[RouterC-msdp] peer 10.110.5.2 connect-interface GigabitEthernet 0/0/3
[RouterC-msdp] quit
# Configure an MSDP peer on Router D.
[RouterD] msdp
[RouterD-msdp] peer 10.110.5.1 connect-interface GigabitEthernet 0/0/3
GigabitEthernet 0/0/3
GigabitEthernet 0/0/2
GigabitEthernet 0/0/3
190