HP A6600 Configuration Manual page 249
Ip multicast
Hide thumbs
Also See for A6600:
- Configuration manual (501 pages) ,
- Getting started (222 pages) ,
- Limited warranty (41 pages)
Table of Contents
Advertisement
[PE2-mpls-ldp] quit
# Create VPN instance b, configure an RD for it, and create an ingress route and an egress route for it.
[PE2] ip vpn-instance b
[PE2-vpn-instance-b] route-distinguisher 200:1
[PE2-vpn-instance-b] vpn-target 200:1 export-extcommunity
[PE2-vpn-instance-b] vpn-target 200:1 import-extcommunity
# Enable IP multicast routing in VPN instance b, configure a share-group address, associate an MTI with
the VPN instance, and define the switch-group-pool address range.
[PE2-vpn-instance-b] multicast routing-enable
[PE2-vpn-instance-b] multicast-domain share-group 239.2.2.2 binding mtunnel 1
[PE2-vpn-instance-b] multicast-domain switch-group-pool 225.4.4.0 28
[PE2-vpn-instance-b] quit
# Create VPN instance a, configure an RD for it, and create an ingress route and an egress route for it.
[PE2] ip vpn-instance a
[PE2-vpn-instance-a] route-distinguisher 100:1
[PE2-vpn-instance-a] vpn-target 100:1 export-extcommunity
[PE2-vpn-instance-a] vpn-target 100:1 import-extcommunity
# Enable IP multicast routing in VPN instance a, configure a share-group address, associate an MTI with
the VPN instance, and define the switch-group-pool address range.
[PE2-vpn-instance-a] multicast routing-enable
[PE2-vpn-instance-a] multicast-domain share-group 239.1.1.1 binding mtunnel 0
[PE2-vpn-instance-a] multicast-domain switch-group-pool 225.2.2.0 28
[PE2-vpn-instance-a] quit
# Configure an IP address, and enable PIM-SM and LDP capability on the public network interface
GigabitEthernet 1/0/1.
[PE2] interface GigabitEthernet 1/0/1
[PE2-GigabitEthernet1/0/1] ip address 192.168.7.1 24
[PE2-GigabitEthernet1/0/1] pim sm
[PE2-GigabitEthernet1/0/1] mpls
[PE2-GigabitEthernet1/0/1] mpls ldp
[PE2-GigabitEthernet1/0/1] quit
# Bind GigabitEthernet 1/0/2 with VPN instance b, configure an IP address and enable PIM-SM on the
interface.
[PE2] interface GigabitEthernet 1/0/2
[PE2-GigabitEthernet1/0/2] ip binding vpn-instance b
[PE2-GigabitEthernet1/0/2] ip address 10.110.3.1 24
[PE2-GigabitEthernet1/0/2] pim sm
[PE2-GigabitEthernet1/0/2] quit
# Bind GigabitEthernet 1/0/3 with VPN instance a, configure an IP address and enable PIM-SM on the
interface.
[PE2] interface GigabitEthernet 1/0/3
[PE2-GigabitEthernet1/0/3] ip binding vpn-instance a
[PE2-GigabitEthernet1/0/3] ip address 10.110.4.1 24
[PE2-GigabitEthernet1/0/3] pim sm
[PE2-GigabitEthernet1/0/3] quit
238
Advertisement
Table of Contents
Troubleshooting
