HP A6600 Configuration Manual page 47

# Configure GigabitEthernet 1/0/3 to be a static router port.
[RouterB] interface GigabitEthernet 1/0/3
[RouterB-GigabitEthernet1/0/3] igmp-snooping static-router-port vlan 100
[RouterB-GigabitEthernet1/0/3] quit
Configure Router C
4.
# Enable IGMP snooping globally.
<RouterC> system-view
[RouterC] igmp-snooping
[RouterC-igmp-snooping] quit
# Create VLAN 100, assign GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 to this VLAN, and
enable IGMP snooping in the VLAN.
[RouterC] vlan 100
[RouterC-vlan100] port GigabitEthernet 1/0/1 GigabitEthernet 1/0/2
[RouterC-vlan100] igmp-snooping enable
[RouterC-vlan100] quit
Configure Router D
5.
# Enable IGMP snooping globally.
<RouterD> system-view
[RouterD] igmp-snooping
[RouterD-igmp-snooping] quit
# Create VLAN 100, assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5 to this VLAN, and
enable IGMP snooping in the VLAN.
[RouterD] vlan 100
[RouterD-vlan100] port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/5
[RouterD-vlan100] igmp-snooping enable
[RouterD-vlan100] quit
# Configure GigabitEthernet 1/0/3 and GigabitEthernet 1/0/5 as static member ports for multicast
group 224.1.1.1.
[RouterD] interface GigabitEthernet 1/0/3
[RouterD-GigabitEthernet1/0/3] igmp-snooping static-group 224.1.1.1 vlan 100
[RouterD-GigabitEthernet1/0/3] quit
[RouterD] interface GigabitEthernet 1/0/5
[RouterD-GigabitEthernet1/0/5] igmp-snooping static-group 224.1.1.1 vlan 100
[RouterD-GigabitEthernet1/0/5] quit
Verify the configuration
6.
# Display the detailed IGMP snooping group information in VLAN 100 on Router B.
[RouterB] display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
36