HP A6600 Configuration Manual page 159

[RouterB-GigabitEthernet0/0/2] quit
[RouterB] interface GigabitEthernet 0/0/4
[RouterB-GigabitEthernet0/0/4] multicast boundary 239.0.0.0 8
[RouterB-GigabitEthernet0/0/4] quit
# On Router C, configure GigabitEthernet 0/0/2 and GigabitEthernet 0/0/4 as the boundary of
admin-scope zone 2.
<RouterC> system-view
[RouterC] interface GigabitEthernet 0/0/2
[RouterC-GigabitEthernet0/0/2] multicast boundary 239.0.0.0 8
[RouterC-GigabitEthernet0/0/2] quit
[RouterC] interface GigabitEthernet 0/0/4
[RouterC-GigabitEthernet0/0/4] multicast boundary 239.0.0.0 8
[RouterC-GigabitEthernet0/0/4] quit
# On Router D, configure GigabitEthernet 0/0/2 as the boundary of admin-scope zone 2.
<RouterD> system-view
[RouterD] interface GigabitEthernet 0/0/2
[RouterD-GigabitEthernet0/0/2] multicast boundary 239.0.0.0 8
[RouterD-GigabitEthernet0/0/2] quit
Configure C-BSRs and C-RPs
4.
# On Router B, configure the service scope of RP advertisements and configure GigabitEthernet 0/0/1 as
a C-BSR and C-RP of admin-scope zone 1.
[RouterB] acl number 2001
[RouterB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[RouterB-acl-basic-2001] quit
[RouterB] pim
[RouterB-pim] c-bsr group 239.0.0.0 8
[RouterB-pim] c-bsr GigabitEthernet 0/0/1
[RouterB-pim] c-rp GigabitEthernet 0/0/1 group-policy 2001
[RouterB-pim] quit
# On Router D, configure the service scope of RP advertisements and configure GigabitEthernet 0/0/1 as
a C-BSR and C-RP of admin-scope zone 2.
[RouterD] acl number 2001
[RouterD-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[RouterD-acl-basic-2001] quit
[RouterD] pim
[RouterD-pim] c-bsr group 239.0.0.0 8
[RouterD-pim] c-bsr GigabitEthernet 0/0/1
[RouterD-pim] c-rp GigabitEthernet 0/0/1 group-policy 2001
[RouterD-pim] quit
# On Router F, configure GigabitEthernet 0/0/1 as a C-BSR and C-RP in the global scope zone.
<RouterF> system-view
[RouterF] pim
[RouterF-pim] c-bsr global
[RouterF-pim] c-bsr GigabitEthernet 0/0/1
[RouterF-pim] c-rp GigabitEthernet 0/0/1
[RouterF-pim] quit
148