Determine the IP address of a static RP and the ACL that defines the range of the multicast groups to
•
be served by the static RP
Determine the C-RP priority and the ACL that defines the range of multicast groups to be served by
•
each C-RP
Determine the legal C-RP address range and the ACL that defines the range of multicast groups to be
•
served
•
Determine the C-RP-Adv interval
•
Determine the C-RP timeout
Determine the C-BSR priority
•
Determine the hash mask length
•
Determine the ACL defining the legal BSR address range
•
Determine the BS period
•
Determine the BS timeout
•
Enabling PIM-SM
Because BIDIR-PIM is implemented on the basis of PIM-SM, you must enable PIM-SM before enabling
BIDIR-PIM. To deploy a BIDIR-PIM domain, enable PIM-SM on all non-border interfaces of the domain.
On a router, all interfaces in the same VPN instance must work in the same PIM mode.
Enabling PIM-SM globally for the public network
To do...
1.
Enter system view.
2.
Enable IP multicast routing.
Enter interface view.
3.
4.
Enable PIM-SM.
Enabling PIM-SM for a VPN instance
To do...
1.
Enter system view.
2.
Create a VPN instance and
enter VPN instance view.
3.
Configure an RD for the VPN
instance.
4.
Enable IP multicast routing.
5.
Enter interface view.
Use the command...
system-view
multicast routing-enable
interface interface-type
interface-number
pim sm
Use the command...
system-view
ip vpn-instance vpn-instance-name
route-distinguisher
route-distinguisher
multicast routing-enable
interface interface-type
interface-number
120
Remarks
—
Required.
Disable by default.
—
Required.
Disabled by default.
Remarks
—
—
Required.
Not configured by default.
Required.
Disabled by default.
—